Soudal Grip All Solvent Based Adhesive 290ml

Soudal Grip All is a solvent based adhesive designed for ultra-strong gap filling using reinforced bonding technology. It provides an high initial grab of 125kg/m² and an incredibly high final bond strength. This beige moisture resistant adhesive also replaces the need for mechanical fixings such as screws and nails.

Benefits

• This adhesive can be used with a variety of materials including wood/plywood, brick stone and breeze block, as well as insulation and plaster boards and metal. Check out the data sheet for the full list.
• Exceptional initial grab of 125kg/m²
• Effective gap filling
• Fast strength build up
• Porous and non-porous materials
• Reinforced bonding technology

 

Good to know

• To begin surfaces should be dry, clean and free of dust, prime your material if it is too porous.
• Apply adhesive to one surface in strips or dabs, including edges and corners
• Press together as hard as you can or tamp down with a rubber hammer. The applied pressure and not the duration of the compression will determine the ultimate strength of the bond.
  
• Only Load after 24 to 48 hours.
• Positioning time is around 5 minutes
• In case of overhead applications a combination with mechanical fixing is required.
  
• Do not use as a mirror adhesive.
  
• Do not use in applications where continuous water immersion is possible.